久久久成人动漫_91欧美视频在线_另类国产ts人妖高潮系列视频_国产精品成人一区_一区二区精品在线_99视频在线

Scan code consultation:
0755-2102 2109
Service
Current location: Home Service Ex engineering
Basic knowledge to be mastered in explosion-proof electrical construction

SINO Testing Services

| 2021-12-06|Return

Explosion proof electrical construction is different from ordinary electrical construction, as it depends on the increased explosion-proof requirements of the environment in which it is located. According to national and industry requirements, we define an explosive environment as an environment where combustible substances such as gas, vapor, mist, or dust form a mixture with air under atmospheric conditions. After ignition, the combustion will spread to the entire unburned mixture. Areas where explosive gas environments or combustible dust environments occur in large quantities or are expected to occur in sufficient quantities to require specialized preventive measures for the structure, installation, and use of electrical equipment are called hazardous areas. Explosion proof electrical construction refers to a job that meets the qualifications, conditions, and professional personnel for explosion-proof electrical construction, and is carried out in explosive environments and hazardous areas with strong professionalism.

The basic knowledge that should be mastered in explosion-proof electrical construction includes the following points:

1、 Classification, grouping, and zoning of explosive substances and hazardous areas.

Explosive gases should be classified according to their maximum test safety gap (MESG) or minimum ignition current ratio (MICR), and should be grouped according to their ignition temperature; Combustible dust can be divided into two types based on its conductive properties: conductive dust and non-conductive dust. Combustible dust is grouped according to its lowest ignition temperature; Explosive hazardous areas are divided into two categories based on the physical state of explosive substances: gas explosion hazardous areas and dust explosion hazardous areas; According to the frequency and duration of explosive gas environments, hazardous areas are classified into three zones: Zone 0, Zone 1, and Zone 2; According to the frequency and duration of combustible dust/air mixtures, as well as the thickness of the dust layer, they can be divided into three zones: Zone 20, Zone 21, and Zone 22;

2、 Selection of explosion-proof electrical equipment for explosive hazardous areas.

The selection principle of explosion-proof electrical equipment is safety, reliability, and economic rationality. The selection should be based on the level of the explosive hazardous area and the category, level, and group of explosive hazardous substances. The specific selection table should refer to the standard AQ3009-2007;

3、 Installation of electrical circuits and explosion-proof electrical equipment in explosive hazardous areas.

The installation methods of electrical circuits in explosive gas environments can be divided into cable wiring and conduit wiring. Electrical circuits should be laid in areas with low explosion hazards or at a distance from the release source, avoiding places that are susceptible to mechanical damage, vibration, corrosion, dust accumulation, and hazardous temperatures. When avoidance is not possible, preventive measures should be taken. The selected low-voltage cables or insulated wires must have a rated voltage higher than the operating voltage of the line and not lower than 500V. The insulated wires must be laid inside conduits, etc. Specific training courses on explosion-proof electrical installation, maintenance, and repair can be attended;

4、 Inspection and maintenance of explosion-proof electrical equipment in hazardous areas.

In order to minimize the ignition hazard of electrical equipment used in hazardous areas, an initial inspection should be conducted on the devices and equipment before they are put into operation and handed over for acceptance upon completion of the project; To ensure that electrical equipment is in good condition and can be used in hazardous areas for a long time, continuous supervision and regular inspections should be carried out. Initial and regular inspections should be entrusted to safety production testing and inspection institutions with explosion-proof professional qualifications.

The inspection and maintenance of explosion-proof electrical equipment should be carried out by qualified professionals who meet the prescribed conditions. These personnel should receive professional training including various explosion-proof types, installation practices, relevant regulations and rules, as well as general principles of hazardous area classification. They should also receive appropriate continuing education or regular training, and have relevant experience and trained qualification certificates. Continuous supervision and regular inspections will be carried out in the future. Propose reasonable remedial measures and equipment replacement measures for maintenance requirements.


Original article by Shenzhen Zhongnuo Testing Technology Co., Ltd. Plagiarism and reprinting by any platform or individual are strictly prohibited!


Related Recommendations
Contact us
0755-2102 2109
Add: 13F, Building C, Kangjia Guangming Technology Center, No. 288 Xingxin Road, Guangming District, Shenzhen
Follow us
Copyright: Shenzhen Zhongnuo Testing Technology Co., Ltd. 粵ICP備18004888號
Service Hotline
18924609560
點擊這里給我發消息 1354407946
點擊這里給我發消息 1354407946
主站蜘蛛池模板: 国产精品99久久久久久宅女 | 国产成人精品二区 | 欧美日韩手机在线观看 | 国产一级毛片高清 | av在线免费播放网站 | 日韩精品免费看 | 一区二区国产在线 | 国产69精品久久久久9999不卡免费 | 亚洲一区二区在线免费 | 成人在线免费视频观看 | 亚洲91精品 | 亚洲视频综合网 | 韩国精品一区二区三区四区五区 | 成码无人av片在线观看网站 | 免费黄色成人 | 日韩在线观看高清 | 一级电影在线免费观看 | 99精品热视频 | 国产九色在线观看 | 日韩av电影在线免费观看 | 草草在线观看 | 澳门一级淫片免费视频 | 可以看毛片的网址 | 免费福利在线视频 | 亚洲第一成人在线 | 99re热视频这里只精品 | 久久久入口 | 87成人免费看片 | 欧美性受ⅹ╳╳╳黑人a性爽 | 国产乱色精品成人免费视频 | 1000部精品久久久久久久久 | 九九视频精品在线观看 | 久久精品日韩 | 亚洲成人精品久久久 | 黄色大片免费看 | 久久人人爽人人爽人人片av免费 | 看中国一级毛片 | 国产国语毛片 | 久久一区国产 | 91免费片| 日本不卡一区二区三区在线观看 |